Best picks

7 Best Expert Grill Replacement Parts (November 2026)

Updated on · By the Easy Recipe Maker team

The best expert grill replacement parts include the Adviace Replacement Grill Parts for Expert Grill for the 3 burner Expert Grill XG10-101-002-02, the CaptainGrill Grease Tray with Catch Pan for an adjustable 24 to 30 inch drip tray, and the Replace parts Porcelain Steel Heat Plate for a 4 pack of 14-9/16 inch heat plates.

On this page (9 sections)
  1. The best Expert Grill replacement parts for each job
  2. How the best Expert Grill replacement parts compare
  3. How we compared these Expert Grill parts
  4. How do I match a part to my Expert Grill model?
  5. What size heat plate do I need for my burners?
  6. How do I choose between a grease tray and a heat plate?
  7. How do I install Expert Grill replacement parts safely?
  8. Should I buy a full kit or single parts?
  9. Verdict: which Expert Grill replacement parts should you buy?

The best Expert Grill replacement parts are the ones that match your exact model number and the size of the part you removed. For the 3 burner XG10-101-002-02, the Adviace 3 pack of heat plates is the closest direct match in this group.

For a 4 burner 720-0789H, the BBQration kit replaces grates, burners, heat plates and igniters together.

Our score weighs specs, features and buyer feedback against what you are shopping for. A direct model match scores higher than a close universal fit.

A part that replaces several worn items at once also scores higher than a single piece.

Start with your model label before you look at any part. The label gives the number you need for a safe match.

If you are not sure what to do next, our guide to How To Fix BBQ Grill? walks through the basic checks.

Measure the old part with a tape in inches. Note length, width and height where it applies.

Take a photo of the shape, since a flat plate and a tented shield do not swap in the same way.

Our picks at a glance

  1. 1 Adviace Replacement Grill Parts for Expert Grill
    Best for the 3 burner Expert Grill XG10-101-002-02

    Adviace Replacement Grill Parts for Expert Grill

    9.7/10 our score

    See it on Amazon
  2. 2 CaptainGrill Grease Tray with Catch Pan
    Best for an adjustable 24 to 30 inch drip tray

    CaptainGrill Grease Tray with Catch Pan

    9.5/10 our score

    See it on Amazon
  3. 3 Replace parts Porcelain Steel Heat Plate
    Best for a 4 pack of 14-9/16 inch heat plates

    Replace parts Porcelain Steel Heat Plate

    9.4/10 our score

    See it on Amazon
  1. 4Unicook 4 Pack 14.56" L Grill Heat

    Unicook 4 Pack 14.56" L Grill Heat

    Best for a thicker 18 gauge heat shield
    Check it
  2. 5Hisencn Grill Charcoal Tray for Expert Grill

    Hisencn Grill Charcoal Tray for Expert Grill

    Best for an expandable charcoal tray
    Check it
  3. 6BBQration Grill Parts Kit for Expert Grill

    BBQration Grill Parts Kit for Expert Grill

    Best for a full 4 burner rebuild kit
    Check it
  4. 7FIRXZYMZ Adjustable Grease Tray with Catch Pan

    FIRXZYMZ Adjustable Grease Tray with Catch Pan

    Best for a tray with liners and gloves
    Check it

The best Expert Grill replacement parts for each job

Each pick below replaces one job on the grill. Heat plates spread heat and shield burners.

A grease tray catches drips below the burners. A charcoal tray holds charcoal for a charcoal model.

A full kit rebuilds several worn parts at once.

No single part fixes every problem. If your burners are rusted and your grates are thin, a kit makes more sense than one heat plate.

If only the heat plates are cracked, a plate pack saves you from buying parts you do not need.

1

Adviace Replacement Grill Parts for Expert Grill: Best for the 3 burner Expert Grill XG10-101-002-02

Adviace Replacement Grill Parts for Expert Grill, expert grill replacement parts
9.7/10Our score
  • 3 porcelain steel heat plates
  • 11-5/8 x 2-3/4 in each
  • For XG10-101-002-02 and GBC2016WRS
  • Drop in fit for a 3 burner grill

A direct 3 pack for the 3 burner XG10-101-002-02, sized at 11-5/8 x 2-3/4 inches per plate.

See it on Amazon

Pros

  • Exact model match for XG10-101-002-02
  • 3 plates in one pack
  • Porcelain steel resists rust and wear

Cons

  • Only fits the listed 3 burner models
  • Does not include burners or grates

The Adviace pack suits owners of the Walmart Expert Grill 3 burner model XG10-101-002-02 or GBC2016WRS. It is the only pick here built around that exact model number.

Each plate measures 11-5/8 x 2-3/4 inches in porcelain steel. The pack holds 3 plates, one for each burner on a 3 burner grill.

Porcelain steel helps the plates shed drips and resist rust better than bare steel. The plates sit over the burners to spread heat and cut flare ups from dripping fat.

In daily use, you drop each plate over its burner and check that it sits flat. A warped or cracked plate lets flame hit food directly, so swap it when the coating fails.

The trade off is narrow fit. These plates are made for the listed models, so they are not the right choice for a 4 burner grill or a longer burner layout.

Adviace Replacement Grill Parts for Expert GrillCheck it on Amazon
2

CaptainGrill Grease Tray with Catch Pan: Best for an adjustable 24 to 30 inch drip tray

CaptainGrill Grease Tray with Catch Pan, expert grill replacement parts
9.5/10Our score
  • Adjustable width 24 to 30 in
  • Depth 15-1/2 in
  • Galvanized steel with catch pan
  • Assembles in 3 pieces

An adjustable galvanized tray that sets to a width from 24 to 30 inches and routes grease to a catch pan.

See it on Amazon

Pros

  • Adjustable width covers many 4 and 5 burner grills
  • Galvanized steel with catch pan included
  • Quick assembly with supplied hardware

Cons

  • Not a direct Expert Grill part by name
  • Measure the old tray before you order

The CaptainGrill tray suits a grill where the drip tray under the burners is warped or rusted through. It is a budget way to fix grease leaks without buying a new grill.

The tray adjusts in width from 24 to 30 inches and is 15-1/2 inches deep. It stands 2-3/4 inches tall with the catch pan in place.

It is made of galvanized steel and comes in 3 pieces that you join with the supplied hardware. Assembly takes about 5 minutes once you set the width.

The sloped center channel guides grease toward the drain end and the catch pan. That shape matters on fatty cooks, when a flat tray can spill over the edge.

The trade off is fit. This tray is listed for Dyna Glo, Nexgrill, Kenmore and other brands, not by name for Expert Grill.

Measure your old tray and compare the width and depth before you order.

CaptainGrill Grease Tray with Catch PanCheck it on Amazon
3

Replace parts Porcelain Steel Heat Plate: Best for a 4 pack of 14-9/16 inch heat plates

Replace parts Porcelain Steel Heat Plate, expert grill replacement parts
9.4/10Our score
  • 4 porcelain steel heat plates
  • 14-9/16 x 3-3/8 in each
  • Fits listed Nexgrill and Grill Master models
  • Shields burners and spreads heat

Four heat plates at 14-9/16 x 3-3/8 inches for a longer burner layout, with a long list of matching models.

See it on Amazon

Pros

  • 4 plates cover a 4 burner layout
  • Porcelain steel shields burners from drips
  • Wide model list for cross checks

Cons

  • Not listed for Expert Grill by name
  • Confirm size against your old plates

The Replace parts pack suits a 4 burner layout where each heat plate runs long. It gives you 4 plates in one pack, so you can replace the full set at once.

Each plate measures 14-9/16 x 3-3/8 inches in porcelain steel. That length covers burners that are much longer than the 11-5/8 inch plates in the Adviace pack.

The plates shield burners from grease and food debris. They also spread heat across the cooking surface, which helps with even cooking and fewer flare ups.

The model list is long. It covers many Nexgrill numbers, plus Grill Master, Charbroil, Kenmore, Dyna Glo and others.

Use that list as a cross check, not as a guarantee.

The trade off is that Expert Grill is not named in the list. If your Expert model matches the size and one of the listed numbers, this pack is a strong value.

If not, choose a model matched pack instead.

Replace parts Porcelain Steel Heat PlateCheck it on Amazon
4

Unicook 4 Pack 14.56" L Grill Heat: Best for a thicker 18 gauge heat shield

Unicook 4 Pack 14.56" L Grill Heat, expert grill replacement parts
9.2/10Our score
  • 4 pack heat shields
  • 14-9/16 x 3-1/4 x 1-7/8 in each
  • 18 gauge porcelain coated steel
  • No tool install

Four heat shields in a near identical footprint, made from 1.2 mm porcelain coated steel for extra thickness.

See it on Amazon

Pros

  • Thicker 18 gauge steel than many replacements
  • Smooth surface is easy to wipe clean
  • No tool needed to install

Cons

  • Check the 1-7/8 inch height for clearance
  • Listed for Nexgrill, Grill Master and Kenmore models

The Unicook pack suits a buyer who wants a thicker heat shield than the usual replacement plate. It is also a 4 pack at a similar size to the Replace parts pack.

Each shield measures 14-9/16 x 3-1/4 x 1-7/8 inches. The steel is 1.2 mm thick, or 18 gauge, in porcelain coated steel.

That thickness is the main point. A thicker shield resists warping under heat and keeps its shape over the burner.

The smooth surface also wipes clean more easily after a cook.

You install these with no tool. The shields drop over the burners and spread heat while they block direct flame contact with drips.

The trade off is height. At 1-7/8 inches tall, the shield needs clearance below the cooking grates.

Check that space on your grill before you buy, since a low grate can rest on a tall shield.

Unicook 4 Pack 14.56" L Grill HeatCheck it on Amazon
5

Hisencn Grill Charcoal Tray for Expert Grill: Best for an expandable charcoal tray

Hisencn Grill Charcoal Tray for Expert Grill, expert grill replacement parts
8.9/10Our score
  • Length adjusts 15.15 to 28.74 in
  • Width 12.91 in
  • Powder coated stainless steel
  • Handles for lifting and moving

An expandable charcoal tray that stretches from about 15 to 29 inches long for Expert charcoal grills.

See it on Amazon

Pros

  • Expandable length fits several grill sizes
  • Handles help with refilling
  • High temperature powder coated finish

Cons

  • For charcoal use, not a gas burner part
  • Confirm the 12.91 inch width fits your grill

The Hisencn tray suits an Expert charcoal grill where the charcoal pan is bent or worn out. It is not a burner part, so it serves a different grill type than the heat plates here.

The tray stretches from 15.15 to 28.74 inches long and is 12.91 inches wide. That range covers the Pit Boss Memphis I size, the Expert size at 20.47 inches, and a 32 inch Expert charcoal model.

For more model-specific options, see Pit Boss pellet grill replacement parts.

It is made of powder coated stainless steel for high heat use. Handles on the tray help you lift and move it when you refill charcoal.

The expandable design lets you set the length to your grill. You slide it out to the size you need and lock it in place for the cook.

The trade off is width. At 12.91 inches wide, the tray needs a grill that can take that width.

Measure the inside of your charcoal chamber before you order, and do not use this tray as a gas grill heat shield.

Hisencn Grill Charcoal Tray for Expert GrillCheck it on Amazon
6

BBQration Grill Parts Kit for Expert Grill: Best for a full 4 burner rebuild kit

BBQration Grill Parts Kit for Expert Grill, expert grill replacement parts
8.7/10Our score
  • 2 cast iron grates, 4 burners, 4 heat plates and igniters
  • Grates 17 x 13-1/4 in each
  • Heat plates 14-9/16 x 3-1/4 in
  • For 720-0789H and XG19-101-002-02

A full rebuild kit for 4 burner Expert Grill models, with grates, burners, heat plates and igniters in one box.

See it on Amazon

Pros

  • Replaces grates, burners and heat plates together
  • Matched to 720-0789H and related models
  • Cast iron grates for sear marks

Cons

  • Only fits the listed 4 burner models
  • Heavier and larger kit to store

The BBQration kit suits an Expert Grill 4 burner owner who wants to rebuild the whole cooking surface at once. It is made for models 720-0789H, XG19-101-002-02 and related numbers.

The box holds 2 cast iron grates, 4 burners, 4 heat plates and igniters. The grates measure 17 x 13-1/4 inches each, for a total of 17 x 26-1/2 inches.

The heat plates measure 14-9/16 x 3-1/4 inches. The burners measure 15 x 5/8 inches.

Those sizes tell you the burner layout this kit was built for.

Cast iron grates give you sear marks and hold heat well. New burners can fix weak or uneven flames when the old tubes are rusted or blocked.

The trade off is scope. A full kit costs more in effort than a plate pack, and it only fits the listed 4 burner models.

If only your plates are worn, a plate pack is the simpler fix. If burners and grates are worn too, this kit saves you from ordering parts one by one.

BBQration Grill Parts Kit for Expert GrillCheck it on Amazon
7

FIRXZYMZ Adjustable Grease Tray with Catch Pan: Best for a tray with liners and gloves

FIRXZYMZ Adjustable Grease Tray with Catch Pan, expert grill replacement parts
8.4/10Our score
  • Adjustable 23.6 to 31.6 in long
  • Width 15 in
  • 4 aluminum liners and gloves included
  • Fits listed Expert Grill 720-0968, 720-0969 and 720-0789

An adjustable grease tray from 23.6 to 31.6 inches with a catch pan, liners and gloves for easier clean up.

See it on Amazon

Pros

  • Wide adjustment range for 3 to 6 burner grills
  • Liners help with clean up
  • Listed Expert Grill models included

Cons

  • Measure your grill before you order
  • Liners are replaceable, so check supply if you want more

The FIRXZYMZ tray suits a grill where you want an adjustable drip pan with liners for easier clean up. It lists Expert Grill models 720-0968, 720-0969 and 720-0789 by name.

The tray adjusts from 23.6 to 31.6 inches long and is 15 inches wide. That range covers most 3, 4 and 5 burner gas grills.

The box holds the tray, a catch pan, 4 aluminum liners, a pair of gloves and screws. The liners sit in the tray so you can lift them out and throw them away after a messy cook.

The sloped tray guides grease to the catch pan. The metal is heavy duty and the edges are polished, which helps with safe handling during install and cleaning.

The trade off is that liners are a consumable. If you cook a lot, check whether you want extra liners on hand.

Also measure your grill, since an adjustable tray still needs the right width and depth to sit level.

FIRXZYMZ Adjustable Grease Tray with Catch PanCheck it on Amazon

How the best Expert Grill replacement parts compare

The Adviace pack is the only direct match for the 3 burner XG10-101-002-02. The BBQration kit is the only full rebuild for the 4 burner 720-0789H.

The FIRXZYMZ tray names Expert models directly.

The Replace parts and Unicook packs are universal style heat plates. They share a 14-9/16 inch length but fit a different burner layout than the Adviace plates.

The CaptainGrill tray is also universal, with a 24 to 30 inch width range.

The Hisencn tray is the only charcoal part here. It does not replace a burner, a grate or a heat plate.

Match it to a charcoal grill, not a gas grill.

ProductBest forCountSizeMaterialOur score
Adviace Replacement Grill Parts for Expert Grillthe 3 burner Expert Grill XG10-101-002-023 heat plates11-5/8 x 2-3/4 inPorcelain steel9.7
CaptainGrill Grease Tray with Catch Panan adjustable 24 to 30 inch drip tray9.5
Replace parts Porcelain Steel Heat Platea 4 pack of 14-9/16 inch heat plates4 heat plates14-9/16 x 3-3/8 inPorcelain steel9.4
Unicook 4 Pack 14.56" L Grill Heata thicker 18 gauge heat shield4 heat shields14.56 x 3.25 x 1.88 in9.2
Hisencn Grill Charcoal Tray for Expert Grillan expandable charcoal trayPowder coated stainless steel8.9
BBQration Grill Parts Kit for Expert Grilla full 4 burner rebuild kit8.7
FIRXZYMZ Adjustable Grease Tray with Catch Pana tray with liners and gloves8.4

How we compared these Expert Grill parts

We compared the parts by model match, size, material and what each part replaces. A direct Expert Grill model match scored higher than a universal fit.

We checked the stated size for each part against the job it does. Heat plates need the right length and width for the burner.

Grease trays need the right width and depth to sit level. A charcoal tray needs the right length and width for the chamber.

We looked at what is in the box. A 3 pack of plates, a 4 pack of shields, a full kit and a tray with liners each solve a different problem.

We scored the kit higher for a full rebuild and the single packs higher for a single fix.

We also looked at material claims from each brand. Porcelain steel, galvanized steel, cast iron and powder coated stainless steel each suit a different part.

We did not treat a material claim as a promise of a set lifespan.

We did not test these parts on a grill. Our score weighs specs, features and buyer feedback against what you are shopping for.

Use the sizes in this guide to check fit on your own grill.

How do I match a part to my Expert Grill model?

Find the model number on the label inside the lid or on the back of the grill. Write it down exactly, with letters and numbers.

That number is your first filter.

Then match the part type. A heat plate sits over a burner.

A burner is the tube that makes the flame. A grate sits on top.

A grease tray sits below the burners. A charcoal tray holds charcoal.

Check the size next. Measure length, width and height of the old part in inches.

Compare those numbers with the size for the part you plan to buy.

Which models are named directly here?

The Adviace pack names XG10-101-002-02 and GBC2016WRS. The BBQration kit names 720-0789H and XG19-101-002-02.

The FIRXZYMZ tray names 720-0968, 720-0969 and 720-0789.

If your model matches one of those numbers, start there. A direct match removes most of the guesswork.

What if my model is not named?

Use size and shape as your next check. Many Expert grills share burner layouts with Nexgrill and other brands built in the same factories.

Measure the old part and compare it with the stated size. Check the shape too, since a tented shield and a flat plate are not the same part.

What size heat plate do I need for my burners?

Measure the old heat plate from end to end in inches. Note the width and the height of the tent or bend.

Those three numbers decide fit.

The Adviace plates are 11-5/8 x 2-3/4 inches for a 3 burner layout. The Replace parts and Unicook plates are about 14-9/16 inches long for a longer layout.

The BBQration plates are 14-9/16 x 3-1/4 inches for its 4 burner kit.

A plate that is too short leaves part of the burner open. A plate that is too long can rest on the next burner or block the grate.

Height matters too, since a tall shield needs space below the grates.

Porcelain steel or thicker steel?

Porcelain steel has a smooth coated surface that sheds drips and resists rust. Most heat plates here use porcelain steel.

The Unicook shields use 1.2 mm steel, or 18 gauge. Thicker steel resists warping better under repeated heat.

If your old plates warped, a thicker shield is worth a look.

How often should heat plates be replaced?

Replace a plate when it is cracked, rusted through, warped or coated in burnt buildup that will not come off. A plate with a hole lets flame hit food and causes flare ups.

Flip the plate and check the underside at least once a season. Light wear is fine.

A hole or a deep crack is a sign to swap it.

How do I choose between a grease tray and a heat plate?

A heat plate sits over each burner and spreads heat. A grease tray sits below the burners and catches drips that fall through.

Most grills need both parts in good shape.

If your food flares up and cooks unevenly, check the heat plates first. If grease pools on the ground or drips from the cabinet, check the grease tray.

The CaptainGrill tray adjusts from 24 to 30 inches wide. The FIRXZYMZ tray adjusts from 23.6 to 31.6 inches long.

Measure your old tray in width, depth and height before you choose.

When is a tray with liners worth it?

Liners help if you cook fatty foods often. You lift the liner out after the cook and throw it away.

That cuts scrubbing time.

The FIRXZYMZ box includes 4 liners and gloves. If you cook twice a week, you will use liners fast, so plan for extra liners if you like that system.

How do I install Expert Grill replacement parts safely?

Turn off the gas at the tank and let the grill cool fully before you start. Remove the old part and note how it sat over the burner or in the tray area.

Set the new part in place and check that it sits flat and level. A heat plate should cover the burner without touching the next one.

A grease tray should sit level so grease flows to the catch pan.

If you swapped a burner, check for gas leaks with soapy water before you light it. If you swapped an igniter, test it with the gas off first.

Our guide to How To Light Expert Gas Grill? covers the lighting steps after a repair.

What tools do I need?

Most heat plates and shields drop in with no tool. Grease trays need the screws and hardware in the box.

A full kit may need a screwdriver for igniters.

Keep a tape measure, a rag and a brush nearby. Clean the burner area before you set the new part, since old buildup can block a new burner.

Should I buy a full kit or single parts?

Buy a full kit when burners, grates and heat plates are all worn. The BBQration kit gives you 2 grates, 4 burners, 4 heat plates and igniters for a 4 burner grill.

Buy single parts when only one part is worn. A 3 pack or 4 pack of heat plates fixes cracked plates without extra parts to store.

Check the rest of the grill before you decide. If the burners are rusted through, new heat plates alone will not fix weak flames.

If the grates are thin and rusty, new burners alone will not improve sear marks.

For a wider view of part types, our roundup of best grill replacement parts explains burners, knobs and grates in more detail. For knob problems, our guide to best gas grill knob replacement covers that fix.

For gas grill parts in general, see best gas grill replacement parts.

Verdict: which Expert Grill replacement parts should you buy?

Pick the Adviace pack if you own the 3 burner XG10-101-002-02 and only the heat plates are worn. Pick the BBQration kit if you own a 4 burner 720-0789H and burners, grates and plates are all worn.

Pick a universal 4 pack of heat plates if your size matches the 14-9/16 inch length and your model cross checks with the list. Pick the thicker Unicook shields if your old plates warped.

Pick the CaptainGrill or FIRXZYMZ tray if the drip tray is the problem. Choose the FIRXZYMZ tray if your Expert model is named and you want liners.

Choose the Hisencn tray only for a charcoal grill.

Measure first, match the model number, then buy. That order saves you the most time and returns.

Our top 3 picks at a glance

  1. 1 Adviace Replacement Grill Parts for Expert Grill
    Best for the 3 burner Expert Grill XG10-101-002-02

    Adviace Replacement Grill Parts for Expert Grill

    9.7/10 our score

    See it on Amazon
  2. 2 CaptainGrill Grease Tray with Catch Pan
    Best for an adjustable 24 to 30 inch drip tray

    CaptainGrill Grease Tray with Catch Pan

    9.5/10 our score

    See it on Amazon
  3. 3 Replace parts Porcelain Steel Heat Plate
    Best for a 4 pack of 14-9/16 inch heat plates

    Replace parts Porcelain Steel Heat Plate

    9.4/10 our score

    See it on Amazon

Frequently asked questions

How do I know which Expert Grill part I need?

Start with the model number on the grill label, then match the part type you removed. Heat plates, burners, grates and grease trays each have their own size and shape.

Measure the old part in inches and compare it with the size for the part you plan to buy before you order.

Can I use a universal heat plate on an Expert Grill?

Yes, if the size and shape match your old plate and the model list includes your grill number. Several heat plates here share a 14-9/16 inch length.

Universal does not mean any size fits, so check length, width and height first.

When should I replace a grease tray instead of cleaning it?

Replace a tray when the metal is warped, rusted through, cracked at the seams or no longer directs grease to the catch pan. Light surface wear alone is not a reason to replace it.

After replacement, check that the tray sits level and the catch pan is in place before you cook.