Best picks

6 Best Dyna-Glo Grill Heat Plates (November 2026)

Updated on · By the Easy Recipe Maker team

The best Dyna-Glo grill heat plates include the Criditpid Grill Heat Plates Shield for Dyna-glo for Dyna-Glo DGF510SBP owners, the Criditpid Porcelain Grill Heat Shields Replacment for a 4-burner replacement set, and the Criditpid Grill Heat Plates Shields for Dyna-Glo for 6-burner Dyna-Glo grills.

On this page (9 sections)
  1. The best Dyna-Glo grill heat plates for each grill
  2. How these Dyna-Glo heat plates were compared
  3. How do you measure a Dyna-Glo heat plate?
  4. Which heat plates fit a Dyna-Glo 3, 4, 5 or 6 burner grill?
  5. Porcelain steel, porcelain-enameled steel and stainless steel: which is best?
  6. How often should you replace grill heat plates?
  7. What if your grill is losing heat or flaring up?
  8. How do you install Dyna-Glo replacement heat plates?
  9. Verdict: the best Dyna-Glo grill heat plates

The best Dyna-Glo grill heat plates for most owners are the Criditpid Grill Heat Plates Shield for Dyna-glo at 15 inches, because that size fits Dyna-Glo DGF510SBP, DGF510SSP and many related models. If you own a 3-burner Dyna-Glo, pick the shorter Hisencn set instead.

Heat plates protect burners, spread heat and turn dripping grease into smoke. When they rust, crack or warp, you get hot spots, flare-ups and uneven cooking.

A correct replacement brings back even heat without a full grill rebuild.

Start with your model number and a tape measure. Then count your burners.

Those two checks will narrow this list faster than any feature comparison.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared size, material, pack count and model fit across these six sets.

Our picks at a glance

  1. 1 Criditpid Grill Heat Plates Shield for Dyna-glo
    Best for Dyna-Glo DGF510SBP owners

    Criditpid Grill Heat Plates Shield for Dyna-glo

    9.7/10 our score

    See it on Amazon
  2. 2 Criditpid Porcelain Grill Heat Shields Replacment
    Best for a 4-burner replacement set

    Criditpid Porcelain Grill Heat Shields Replacment

    9.5/10 our score

    See it on Amazon
  3. 3 Criditpid Grill Heat Plates Shields for Dyna-Glo
    Best for 6-burner Dyna-Glo grills

    Criditpid Grill Heat Plates Shields for Dyna-Glo

    9.4/10 our score

    See it on Amazon
  1. 4Hisencn Porcelain-Enameled Steel Heat Plates for Dyna-GloCheck it
  2. 5SafBbcue Heat Plates for Dyna-Glo

    SafBbcue Heat Plates for Dyna-Glo

    Best for wide model coverage
    Check it
  3. 6FIRXZYMZ DGH474CRP Heat Plate for Dyna-Glo

    FIRXZYMZ DGH474CRP Heat Plate for Dyna-Glo

    Best for DGH474CRP and DGH450CRP grills
    Check it

The best Dyna-Glo grill heat plates for each grill

The top three picks cover the most common 15-inch Dyna-Glo size. The remaining picks solve shorter 3-burner grills, wide model coverage and DGH-series grills with a different plate shape.

1

Criditpid Grill Heat Plates Shield for Dyna-glo: Best for Dyna-Glo DGF510SBP owners

Criditpid Grill Heat Plates Shield for Dyna-glo, Dyna-Glo grill heat plates
9.7/10Our score
  • 15 x 3 13/16 inches
  • Porcelain steel
  • 5 heat shield plates

A 15-inch porcelain steel set sized for Dyna-Glo DGF510SBP, DGF510SSP and many Backyard Grill models. Measure your old plate before you order.

See it on Amazon

Pros

  • Fits DGF510SBP and DGF510SSP
  • Five plates for most burner layouts
  • Porcelain steel resists rust

Cons

  • 15-inch size does not fit 3-burner DGC310 models
  • Confirm width against your original plate

This Criditpid set suits owners of the Dyna-Glo DGF510SBP and DGF510SSP who need five plates in a 15-inch size. The 15 x 3 13/16 inch dimensions match the most common Dyna-Glo replacement size in this group.

Porcelain steel gives the plates a hard, smooth surface that resists rust and corrosion. Criditpid says the material holds up under constant use, which matters if you grill several times a week.

Five plates fit many 5-burner layouts without buying a second pack. You also get fit for Backyard Grill, Uniflame, Outdoor Gourmet and Better Homes & Gardens models, which helps if your grill was sold under a related brand.

The main trade-off is size. These plates are too long for Dyna-Glo 3-burner models that use a 13 7/10-inch plate.

Measure your old plate and confirm the width before you order.

Criditpid Grill Heat Plates Shield for Dyna-gloCheck it on Amazon
2

Criditpid Porcelain Grill Heat Shields Replacment: Best for a 4-burner replacement set

Criditpid Porcelain Grill Heat Shields Replacment, Dyna-Glo grill heat plates
9.5/10Our score
  • 15 x 3 13/16 inches
  • Porcelain steel
  • 4 heat shield plates

A 4-pack in the same 15-inch porcelain steel size for Dyna-Glo DGF510SBP, DGF493BNP and related models. It suits a 4-burner grill that needs a full set.

See it on Amazon

Pros

  • Four plates match many 4-burner layouts
  • Same 15-inch size as the top pick
  • Porcelain steel construction

Cons

  • Only four plates for a 5 or 6 burner grill
  • Measure length and width before ordering

This Criditpid 4-pack suits a 4-burner Dyna-Glo that needs a full replacement set. It uses the same 15 x 3 13/16 inch porcelain steel size as the top pick, so sizing is easy if you already measured a 15-inch plate.

The set fits Dyna-Glo DGF510SSP, DGF510SBP and DGF493BNP models, plus many Backyard Grill and Uniflame models. Criditpid says the porcelain steel is durable, anti-rust and high temperature resistant.

Four plates are the right count for many 4-burner grills. Buyers with a 5 or 6 burner grill should look at the 5-pack or 6-pack instead, since a missing plate leaves one burner unprotected.

Choose this set when your burner count matches the pack count. That simple match avoids gaps, overlaps and extra parts you do not need.

Criditpid Porcelain Grill Heat Shields ReplacmentCheck it on Amazon
3

Criditpid Grill Heat Plates Shields for Dyna-Glo: Best for 6-burner Dyna-Glo grills

Criditpid Grill Heat Plates Shields for Dyna-Glo, Dyna-Glo grill heat plates
9.4/10Our score
  • 15 x 3 13/16 inches
  • Porcelain steel
  • 6 heat plates
  • Replaces Dyna-Glo part 70-01-179

A 6-pack for Dyna-Glo DGB610SSP, DGF600SSP, DGF510SBP and DGF493BNP models. It gives larger grills a full set of 15-inch heat tents.

See it on Amazon

Pros

  • Six plates for 6-burner layouts
  • Lists DGB610SSP and DGF600SSP fit
  • Replaces part 70-01-179

Cons

  • Too many plates for a small grill
  • 15-inch length needs checking on your model

This Criditpid 6-pack suits larger Dyna-Glo grills such as the DGB610SSP and DGF600SSP. Each plate measures 15 x 3 13/16 inches and uses porcelain steel, the same size used across most of this roundup.

Six plates give a 6-burner grill full coverage in one order. The set also lists fit for DGF510SBP, DGF510SSP, DGF493BNP and DGB494SPB models, plus Backyard Grill and Outdoor Gourmet models.

Criditpid says this heat tent replaces original Dyna-Glo part 70-01-179. Check that part number against your old plate if your model list is hard to read.

The trade-off is pack size. A small grill has no use for six plates, and extra plates take up storage space.

Pick this set when your burner count actually calls for six.

Criditpid Grill Heat Plates Shields for Dyna-GloCheck it on Amazon
4

Hisencn Porcelain-Enameled Steel Heat Plates for Dyna-Glo: Best for 3-burner Dyna-Glo grills

Hisencn Porcelain-Enameled Steel Heat Plates for Dyna-Glo, Dyna-Glo grill heat plates
9.3/10Our score
  • 13 7/10 x 3 1/5 inches
  • Porcelain-enameled steel
  • 3 heat plates

A 13 7/10-inch set for Dyna-Glo 3-burner models DGC310CNP-D, DGC310RNP-D and DGC310BNP-D. Its narrower size is the key difference from the larger picks.

See it on Amazon

Pros

  • Sized for Dyna-Glo 3-burner grills
  • Three plates match a 3-burner layout
  • Smooth surface for easy cleaning

Cons

  • Not suited to DGF510 models
  • Only three plates in the set

This Hisencn set suits Dyna-Glo 3-burner grills, including DGC310CNP-D, DGC310RNP-D and DGC310BNP-D. The plates measure 13 7/10 x 3 1/5 inches, which is shorter and narrower than the 15-inch plates.

Three plates match a 3-burner layout. Hisencn made them from heavy duty porcelain steel that is thicker and heavier than alternatives, with rust and corrosion resistance.

The smooth surface is non-stick for oil, so you can wash the plates with soapy water. Hisencn says dripping grease evaporates on the plate and adds smoky flavor, while heat radiates more evenly to the grates.

Choose this set for a 3-burner Dyna-Glo and skip it for 15-inch models. A plate that is too short leaves part of the burner exposed, so size matters more than pack count here.

Hisencn Porcelain-Enameled Steel Heat Plates for Dyna-GloCheck it on Amazon
5

SafBbcue Heat Plates for Dyna-Glo: Best for wide model coverage

SafBbcue Heat Plates for Dyna-Glo, Dyna-Glo grill heat plates
9.1/10Our score
  • 15 x 3 13/16 inches
  • Porcelain-enameled
  • 5 heat shields

A 5-pack for Dyna-Glo 5-burner DGF510SBP, 4-burner DGF493BNP and 6-burner DGB610SSP models. Check your burner count before choosing a 5-pack.

See it on Amazon

Pros

  • Covers 4, 5 and 6 burner Dyna-Glo models
  • Five plates in one pack
  • Lists original part numbers including 70-01-179

Cons

  • Five plates may not match every layout
  • 15-inch size still needs measuring

This SafBbcue 5-pack suits Dyna-Glo owners who want broad model coverage in one set. Each plate measures 15 x 3 13/16 inches and uses porcelain-enameled material.

The fit list covers Dyna-Glo 5-burner DGF510SBP models, 4-burner DGF493BNP models and 6-burner DGB610SSP models. It also lists Backyard, Uniflame, Better Homes & Gardens, Outdoor Gourmet, Montana, Tera Gear and Phoenix models.

SafBbcue lists original part numbers including 5510156, 70-01-179, 70-01-282 and 70-01-608. Those numbers help if your plate markings are worn but still readable.

Five plates work well for many 5-burner grills, but a 4-burner grill may have one spare and a 6-burner grill may need one more. Count your burners before you choose this pack.

SafBbcue Heat Plates for Dyna-GloCheck it on Amazon
6

FIRXZYMZ DGH474CRP Heat Plate for Dyna-Glo: Best for DGH474CRP and DGH450CRP grills

FIRXZYMZ DGH474CRP Heat Plate for Dyna-Glo, Dyna-Glo grill heat plates
8.8/10Our score
  • 15 1/4 x 2 3/4 inches and 15 1/4 x 5 1/2 inches
  • Porcelain steel
  • Set of 5 heat plates

A mixed-size set for Dyna-Glo DGH474CRP, DGH485CRP and DGH450CRP models. It includes four 70-02-411 plates and one wider 70-02-412 plate.

See it on Amazon

Pros

  • Made for DGH474CRP and DGH485CRP
  • Made for DGH450CRP 4-burner models
  • Includes the wider 70-02-412 plate

Cons

  • Mixed sizes need careful placement
  • Not the same shape as 15 x 3 13/16 inch plates

This FIRXZYMZ set suits Dyna-Glo DGH-series grills, including DGH474CRP, DGH485CRP and DGH483CRP 5-burner models. It also fits DGH450CRP 4-burner and DGH373CRP 3-burner models.

The set includes four plates at 15 1/4 x 2 3/4 inches and one wider plate at 15 1/4 x 5 1/2 inches. That mixed shape is different from the standard 15 x 3 13/16 inch plates, so compare it with your old plates first.

FIRXZYMZ made the plates from 22GA porcelain steel. The smooth surface is non-stick for oil, and you can clean it with a grill brush, soap and water.

Choose this set when your model is a DGH-series grill or your old plate matches part 70-02-411 or 70-02-412. Skip it if your grill uses the standard 15 x 3 13/16 inch shape.

FIRXZYMZ DGH474CRP Heat Plate for Dyna-GloCheck it on Amazon

How these Dyna-Glo heat plates were compared

We compared the six sets by plate size, material, pack count and model fit. Size came first, because a plate that is too long, too short or too narrow will not sit correctly over the burner.

Material came next. Most sets here use porcelain steel or porcelain-enameled steel, which gives a smooth, rust resistant surface for repeated heating and cleaning.

Pack count came after that. A 3-pack fits a 3-burner grill, a 4-pack fits many 4-burner grills, and 5-pack or 6-pack sets suit larger layouts.

The right count prevents gaps over the burners.

We also checked model lists and original part numbers. Dyna-Glo, Backyard Grill, Uniflame, Outdoor Gourmet and Better Homes & Gardens share many grill designs, so cross-brand fit lists are common.

ProductBest forSizeMaterialPack countOur score
Criditpid Grill Heat Plates Shield for Dyna-gloDyna-Glo DGF510SBP owners15 x 3 13/16 inchesPorcelain steel59.7
Criditpid Porcelain Grill Heat Shields Replacmenta 4-burner replacement set15 x 3 13/16 inchesPorcelain steel49.5
Criditpid Grill Heat Plates Shields for Dyna-Glo6-burner Dyna-Glo grills15 x 3 13/16 inchesPorcelain steel69.4
Hisencn Porcelain-Enameled Steel Heat Plates for Dyna-Glo3-burner Dyna-Glo grills13 7/10 x 3 1/5 inchesPorcelain-enameled steel39.3
SafBbcue Heat Plates for Dyna-Glowide model coverage15 x 3 13/16 inchesPorcelain-enameled59.1
FIRXZYMZ DGH474CRP Heat Plate for Dyna-GloDGH474CRP and DGH450CRP grills15 1/4 x 2 3/4 inches, plus 15 1/4 x 5 1/2 inchesPorcelain steel58.8

How do you measure a Dyna-Glo heat plate?

Measure length, width and burner count before you shop. That takes a few minutes and prevents most wrong orders.

Remove one plate and lay it flat. Measure from end to end for length, then measure the widest point for width.

Write both numbers down, including fractions.

What size is a standard Dyna-Glo heat plate?

Most Dyna-Glo replacement plates in this group measure 15 x 3 13/16 inches. That size fits DGF510SBP, DGF510SSP, DGF493BNP and many Backyard Grill models.

The Hisencn set is the exception at 13 7/10 x 3 1/5 inches for 3-burner Dyna-Glo models. The FIRXZYMZ set uses 15 1/4-inch lengths with two different widths for DGH-series grills.

How do you check the model number?

Find the model number on the grill label, usually near the control panel or inside the lid. Compare that number with the fit list for each set.

If the label is worn, use the original part number on the plate. Part 70-01-179, 70-02-411 and 70-02-412 all appear in this group.

How do you spot a worn plate before you measure?

Look for rust spots, burnt through areas and edges that curl upward. A plate that no longer sits flat will wobble when you press its corners.

Check for thin metal by tapping the surface and looking for holes where dripping grease has eaten through. Those plates are a safety issue because they expose burners to flare-ups.

Which heat plates fit a Dyna-Glo 3, 4, 5 or 6 burner grill?

Burner count and plate size decide the right set. A full set with one plate per burner gives the most even coverage.

A 3-burner Dyna-Glo uses the Hisencn set at 13 7/10 x 3 1/5 inches. That size fits DGC310CNP-D, DGC310RNP-D and DGC310BNP-D models.

A 4-burner Dyna-Glo often uses the Criditpid 4-pack at 15 x 3 13/16 inches. It fits DGF493BNP and DGB494SPB models, among others.

A 5-burner Dyna-Glo often uses a 5-pack in the 15-inch size. The Criditpid 5-pack and SafBbcue 5-pack both list DGF510SBP fit.

A 6-burner Dyna-Glo often uses the Criditpid 6-pack. It lists DGB610SSP and DGF600SSP fit, with plates at 15 x 3 13/16 inches.

DGH-series grills are different. The FIRXZYMZ set fits DGH474CRP, DGH485CRP and DGH450CRP models with its mixed plate sizes.

If your grill is a different brand, read our guide to best gas grill heat plates and our best Cuisinart grill heat plates roundup. Those guides cover other sizes and shapes.

Porcelain steel, porcelain-enameled steel and stainless steel: which is best?

Porcelain steel and porcelain-enameled steel are the materials used by every set here. Both give a smooth surface that resists rust and cleans with soap and water.

Porcelain steel is a steel plate with a porcelain coating. The coating protects the steel from direct contact with grease, heat and moisture.

Porcelain-enameled steel uses a similar idea with an enamel finish. Hisencn and SafBbcue use that wording for their sets, and both describe a smooth, easy to clean surface.

Stainless steel is another option on some grills, but none of the six sets here use it. Do not assume a stainless plate will fit a Dyna-Glo unless its size and shape match your original plate.

For most Dyna-Glo owners, porcelain steel is the safe choice. It matches the original material, fits the listed models and costs less than specialty materials.

How does the coating hold up in daily use?

The porcelain layer resists rust until it chips, cracks or wears thin from scraping. Once the steel shows through, moisture can reach the metal and start corrosion.

Heavy duty porcelain steel, as used by Hisencn and FIRXZYMZ in 22GA thickness, is thicker than standard plates. That extra gauge helps the plate keep its shape over a burner.

When should you choose a thicker plate?

Choose a thicker plate if you grill often, cook fatty food or store the grill outdoors without a cover. Thicker steel resists warping when heat cycles on and off.

A thinner plate may work for occasional use, but it can warp sooner and create uneven gaps. For a replacement you plan to keep for years, thickness matters.

How often should you replace grill heat plates?

Replace heat plates when they crack, warp, rust through or stop sitting flat. A bent plate can leave part of a burner exposed and cause uneven heat.

Inspect plates at the start of grilling season and after heavy use. Turn them over, check both sides and look for thin spots, holes or sharp edges.

Burn off loose residue after a cook, then scrub with a grill brush once the plates cool. Wash with soapy water if the residue is baked on.

Store plates dry when you can. Moisture speeds rust, even on porcelain coated steel, especially if the coating is chipped.

If plates still look sound, you can keep using them. There is no fixed schedule, so condition matters more than age.

What shortens plate life fastest?

Constant high heat, fatty drippings and outdoor storage all shorten plate life. Grease that burns on the surface can damage the porcelain coating over time.

Scraping with a metal tool can chip the coating and expose steel. Use a grill brush and avoid gouging the surface when you clean.

What if your grill is losing heat or flaring up?

New heat plates can help with uneven heat, but they do not fix every grill problem. Check the full picture before you replace parts.

Low heat can come from a clogged burner, a low propane tank or a blocked venturi tube. Flaring can come from grease buildup, worn plates or food dripping directly onto a burner.

If your grill has weak flames on all burners, check propane flow and burner ports first. If one burner is weak, inspect that burner for clogs and misalignment.

Our guide to why is my grill losing heat walks through those checks in order. It helps you avoid replacing plates when the real problem sits elsewhere.

For broader repairs, our How To Fix BBQ Grill? guide covers burner, igniter and regulator issues. Work through safety checks before you cook again.

If a knob feels loose or is hard to turn, check our best gas grill knob replacement guide. A damaged knob can make heat control unsafe.

If you want a plate that spreads heat for slow cooking, check our Best Heat Diffuser Plate guide. That type of plate is different from a flame tamer over a burner.

How do you install Dyna-Glo replacement heat plates?

Installation takes a few minutes and needs no tools on most grills. Lift out the old plates and set the new plates over the burners.

Center each plate over its burner tube. The plate should sit flat, with no rocking, wobbling or sharp tilt.

Check the gap between the plate and the cooking grates. The plate should not touch the grates or block air flow.

Run the grill on medium for a few minutes and watch for even flames. A plate that sits crooked can create a hot spot on one side.

If a plate does not sit flat, turn it around or swap it with another plate. Porcelain steel plates are often symmetric, so a different orientation can fix a slight fit issue.

How do you seat mixed size plates?

Place the wider plate where your old wide plate sat, usually over the main burner area. Use the narrower plates on the remaining burners.

Label the positions before you remove the old set if the layout is not obvious. That prevents a wide plate from sitting where a narrow one belongs.

Verdict: the best Dyna-Glo grill heat plates

The best Dyna-Glo grill heat plates for most owners are the Criditpid Grill Heat Plates Shield for Dyna-glo at 15 inches. They fit DGF510SBP, DGF510SSP and many related models, with five porcelain steel plates in the pack.

Pick the Hisencn set if you own a Dyna-Glo 3-burner grill with a 13 7/10-inch plate. Pick the FIRXZYMZ set if you own a DGH474CRP, DGH485CRP or DGH450CRP model.

Pick the Criditpid 4-pack for a 4-burner grill and the Criditpid 6-pack for a 6-burner grill. Pick the SafBbcue 5-pack if its model and part number list matches your old plates.

Measure your old plate, count your burners and check your model number before you order. Those three checks will help you choose the right Dyna-Glo grill heat plates the first time.

Our top 3 picks at a glance

  1. 1 Criditpid Grill Heat Plates Shield for Dyna-glo
    Best for Dyna-Glo DGF510SBP owners

    Criditpid Grill Heat Plates Shield for Dyna-glo

    9.7/10 our score

    See it on Amazon
  2. 2 Criditpid Porcelain Grill Heat Shields Replacment
    Best for a 4-burner replacement set

    Criditpid Porcelain Grill Heat Shields Replacment

    9.5/10 our score

    See it on Amazon
  3. 3 Criditpid Grill Heat Plates Shields for Dyna-Glo
    Best for 6-burner Dyna-Glo grills

    Criditpid Grill Heat Plates Shields for Dyna-Glo

    9.4/10 our score

    See it on Amazon

Frequently asked questions

How do I know which Dyna-Glo heat plate size I need?

Measure the length and width of a removed plate, then compare those numbers with the size for the set you choose. Most picks here measure 15 x 3 13/16 inches, while the Hisencn set measures 13 7/10 x 3 1/5 inches for 3-burner models.

Also count your burners and check your grill model number before you order.

Can one set fit both a 4-burner and a 5-burner Dyna-Glo?

Sometimes the same plate size fits both, but the pack count may not be right for each layout. A 4-pack suits a 4-burner grill, while a 5-burner grill usually needs five plates.

Check the model list and count the burners on your grill before you choose the pack.

What do heat plates do on a gas grill?

Heat plates sit over the burners and spread heat toward the cooking grates. They also catch dripping grease and other drippings before they hit the burner.

That grease vaporizes on the hot plate, which adds smoky flavor and helps reduce flare-ups.

How often should you replace Dyna-Glo grill heat plates?

Replace them when they crack, warp, rust through or no longer sit flat over the burners. A plate that shifts or leaves a burner partly exposed can cause uneven heat and more flare-ups.

Regular grilling shortens plate life, so inspect them each season and after heavy use.

Are porcelain steel heat plates hard to clean?

Porcelain steel has a smooth surface, so baked-on residue usually comes off with a grill brush and soapy water. Hisencn says the smooth surface is non-stick for oil and easy to wash.

Let the plates cool first, scrub away loose residue, then wash and dry them before you put them back.