6 Best Char-Broil Replacement Grill Grates (November 2026)
The best Char-Broil grill replacement grates include the Charbroil Professional for matching TRU-Infrared systems, the BBQration 17 x 8 3/4 Grill Grates for compatible 2-burner TRU-Infrared grills, and the GGC 17" x23 1/4" Grill Grates Replacement for 3-burner cast iron replacements.
On this page (5 sections)
The best charbroil grill replacement grates for many TRU-Infrared owners are the Charbroil Professional sections, because they combine the cooking grate with an emitter in one replacement system. That combination matters when both layers have worn during regular outdoor use.
For other Char-Broil grills, the safest choice starts with the exact model number rather than the series name alone. Grate dimensions, piece layout and emitter requirements can separate a correct fit from a near miss.
This guide compares six options across Char-Broil Commercial, Signature, Professional, Performance and TRU-Infrared models. Each option uses a different pack size, material or layout, so the details below focus on those stated differences.
We checked the listed materials, dimensions, included parts and compatibility lists for each set. You should still measure your original grates before ordering, because a similar looking replacement may not match the section layout.
Size is the first practical check in daily use. A grate that is slightly too wide can sit unevenly, while a piece that is too short may leave gaps at the edge of the cooking area.
Piece count matters just as much as total size. Some grills use uniform sections, while others use one large grate with narrower pieces around it.
Material affects care as well as cooking feel. Cast iron options generally call for oiling and gentle cleaning, while porcelain coated surfaces need tools that avoid damaging the coating.
Emitter needs add another layer to the decision. A grate only set can refresh the top surface, but it will not solve a warped or damaged emitter tray underneath.
The Charbroil Professional option gives clear section guidance by burner layout. That makes it easier to plan how many sections to buy once the grill series and model year are confirmed.
Other sets are better for narrower needs. A two pack may suit a compatible 2-burner layout, while a three piece set may match a 3-burner or mixed width arrangement.
Pellet grill owners can compare grates for pellet grills after checking their fit.
If you need a wider comparison beyond Char-Broil, see our guide to best replacement grill grates.
For charcoal models, use the separate guide to best charcoal grill replacement grates.
Use the model label as your anchor before comparing prices or materials. The right replacement should match the original grill first and the cooking preference second.
Our picks at a glance
-
1
-
2
Best for compatible 2-burner TRU-Infrared grillsBBQration 17 x 8 3/4 Grill Grates
9.5/10 our score
See it on Amazon -
3
Best for 3-burner cast iron replacementsGGC 17" x23 1/4" Grill Grates Replacement
9.4/10 our score
See it on Amazon
- 4
Check itDirect Parts DC121 16 7/8" Polished Porcelain
Best for broad multi-brand compatibility - 5
Check itBQMAX 17" x 9 1/2" Cooking Grates
Best for grate and emitter replacement - 6
Check itCharbrofire 463365021 Grill Grates Replacement Parts
Best for Charbroil Performance 4-burner grills
Which Char-Broil grill replacement grates fit different needs?
The best Char-Broil replacement grate depends on whether your grill needs cooking surfaces only or a complete grate-and-emitter setup. The model number and original grate dimensions should decide the final match.
Our score weighs specs, features and buyer feedback against what you're shopping for. The products are ordered from highest score to lowest score.
| Product | Best for | Size | Material | System | Our score |
|---|---|---|---|---|---|
| Charbroil Professional | matching TRU-Infrared systems | 6 in W x 17 in D per section | Stainless steel and porcelain-coated cast iron | TRU-Infrared | 9.6 |
| BBQration 17 x 8 3/4 Grill Grates | compatible 2-burner TRU-Infrared grills | 17 x 8 3/4 in each | Matte cast iron | 9.5 | |
| GGC 17" x23 1/4" Grill Grates Replacement | 3-burner cast iron replacements | 17 x 7 3/4 in each; 17 x 23 1/4 in total | Heavy-duty matte cast iron | 9.4 | |
| Direct Parts DC121 16 7/8" Polished Porcelain | broad multi-brand compatibility | 16 7/8 x 9 5/16 in each | Polished porcelain-coated cast iron | 9.2 | |
| BQMAX 17" x 9 1/2" Cooking Grates | grate and emitter replacement | 9.0 | |||
| Charbrofire 463365021 Grill Grates Replacement Parts | Charbroil Performance 4-burner grills | Matte enamel cast iron | 8.7 |
Charbroil Professional: best for matching TRU-Infrared systems
Charbroil Professional: Best for matching TRU-Infrared systems
- 6 x 17 in sections
- Stainless steel and porcelain-coated construction
- TRU-Infrared grate and emitter
- Fits 2015 and newer Commercial, Signature and Professional Series gas grills
This grate and emitter combination suits owners replacing both parts in compatible Char-Broil TRU-Infrared gas grills. Buy 3 sections for 2-burner grills, 4 for 3-burner grills or 5 for 4-burner grills.
Pros
- Includes grate and emitter
- Clear section-count guidance
- Fits several Char-Broil series
Cons
- Not compatible with Performance Series TRU-Infrared grills
- Requires model-year and section-count checks
Charbroil Professional is the strongest pick when your grill is a compatible Commercial, Signature or Professional Series TRU-Infrared gas grill. Each section measures 6 in wide by 17 in deep, and the set combines the grate with an emitter.
The section count depends on the burner layout. Buy 3 sections for a 2-burner grill, 4 sections for a 3-burner grill or 5 sections for a 4-burner grill.
The product title identifies compatibility with 2015 and newer grills, while the supplied model information also warns against Char-Broil Performance Series TRU-Infrared grills. Check the last 2 digits of the model number on the back of the grill or inside the product guide.
The stainless steel and porcelain-coated construction makes this a system replacement rather than a grate-only swap. That matters when worn emitters are part of the problem.
Choose it when you want a Charbroil-branded grate and emitter combination with a clear section-count guide. Confirm the model series first because Performance Series TRU-Infrared grills are excluded.
BBQration 17 x 8 3/4 Grill Grates: best for compatible 2-burner TRU-Infrared grills
BBQration 17 x 8 3/4 Grill Grates: Best for compatible 2-burner TRU-Infrared grills
- 2-pack matte cast iron grates
- 17 x 8 3/4 in each
- Works with specified Commercial and Signature models
- Requires an additional infrared emitter tray
This 2-pack is aimed at specific Char-Broil Commercial, Signature and Medallion TRU-Infrared grill models. It is a grate-only option, so the separate emitter-tray requirement matters.
Pros
- Useful 2-pack format
- Matte cast iron
- Detailed model-number coverage
Cons
- Emitter tray is required separately
- Fit depends on exact model and dimensions
BBQration provides a 2-pack of matte cast iron grates, with each piece measuring 17 x 8 3/4 in. The total stated coverage is 17 x 17 1/2 in.
This option covers specific Commercial and Signature TRU-Infrared 2-burner models, plus a Commercial Double Header 4-burner model and a Medallion Series Modular Outdoor Kitchen Amplifire 5-burner model. Compare your model number with the compatibility list before buying.
A key trade-off is the emitter requirement. The grates need an additional infrared emitter tray, so they are not a complete grate-and-emitter kit.
Cast iron retains heat and can support defined grill marks. BBQration also gives general care guidance to clean and oil the grate after use, which is useful for maintaining a cast iron cooking surface.
Choose this pack when your Char-Broil grill matches the listed model numbers and your emitter tray is usable or already covered separately. If your emitter also needs replacement, compare it with the complete BQMAX kit below.
GGC 17" x23 1/4" Grill Grates Replacement: best for 3-burner cast iron replacements
GGC 17" x23 1/4" Grill Grates Replacement: Best for 3-burner cast iron replacements
- 3 cast iron grates
- 17 x 7 3/4 in each
- 17 x 23 1/4 in total
- Fits specified Commercial and Signature infrared models
The three-piece layout suits compatible Char-Broil Commercial and Signature infrared 3-burner grills. Its heavier cast iron format favors buyers who want heat retention and defined grill marks.
Pros
- Three-piece coverage
- Heavy-duty cast iron
- Specific model-number fit list
Cons
- Aftermarket fit must be checked
- Does not include an emitter system
GGC supplies 3 matte cast iron grates, each measuring 17 x 7 3/4 in, for a total stated width of 17 x 23 1/4 in. The layout is aimed at compatible Char-Broil Commercial and Signature infrared 3-burner grills.
The compatibility list includes Commercial infrared models such as 463242515, 463242516, 463243016 and 463246018. It also names Signature infrared models 463342620 and 463367016, along with original part numbers G466-0025-W1A and G474-0017-W1.
This is a grate-only replacement. It does not include an emitter plate, so check the condition of the parts below the cooking surface before choosing it.
The heavy-duty cast iron construction favors buyers who want heat retention and grill marks. Its 17.86 lb item weight also signals a substantial set, so handle and store the grates carefully during installation.
Choose GGC when the 3-piece dimensions match your original set and your existing emitter parts are still suitable. Do not rely on the Char-Broil series name alone because the exact model list controls the fit.
Direct Parts DC121: best for broad multi-brand compatibility
Direct Parts DC121 16 7/8" Polished Porcelain: Best for broad multi-brand compatibility
- 3 cooking grids
- 16 7/8 x 9 5/16 in each
- Polished porcelain-coated cast iron
- Fits specified Charbroil, Master Chef, Kenmore, Backyard Grill and Thermos models
This three-grid set is useful when a Charbroil model shares its grate dimensions with the listed Master Chef, Kenmore, Backyard Grill or Thermos models. Measure the old grids before ordering.
Pros
- Three-grid set
- Porcelain-coated cast iron
- Wide model-number coverage
Cons
- Exact fit still depends on measurements
- Does not include emitter plates
Direct Parts DC121 is a 3-grid set with each grid measuring 16 7/8 x 9 5/16 in. The material is polished porcelain-coated cast iron.
The set covers a long list of Charbroil models, including 463432215, 463436213, 463436214, 463436215, 463441312 and 463441514. It also names compatible Master Chef, Kenmore, Backyard Grill and Thermos models.
This wider compatibility list helps when a replacement part uses shared dimensions across brands. It also increases the need for careful checking because several models can look similar while using different grate layouts.
Direct Parts recommends preheating on high for 15 minutes and brushing clean with a grill brush. Porcelain-coated cast iron needs care that avoids damaging the coating, so follow the grill and grate instructions when selecting tools.
Choose DC121 if your original grill uses 3 grids of the stated size and you want porcelain-coated cast iron. If your grill is a TRU-Infrared model with separate emitters, compare a complete kit instead.
BQMAX 17" x 9 1/2" Cooking Grates: best for grate and emitter replacement
BQMAX 17" x 9 1/2" Cooking Grates: Best for grate and emitter replacement
- 3 matte cast iron cooking grates
- 3 stainless steel emitters
- 17 x 9 1/2 in cooking grates
- 17 x 10 in emitters
This kit helps when both cooking grates and emitter plates need replacing in compatible Char-Broil TRU-Infrared 3-burner or 4-burner models. Confirm the model number because the kit covers several series.
Pros
- Includes grates and emitters
- Three-piece grate set
- Detailed compatibility list
Cons
- Fit depends on exact model
- Larger total package needs storage before installation
BQMAX is the best choice here when both the cooking grates and emitter plates need replacement. The package includes 3 matte cast iron cooking grates and 3 stainless steel emitters.
Each cooking grate measures 17 x 9 1/2 in, while each emitter measures 17 x 10 in. The complete stated totals are 17 x 28 1/2 in for the grates and 17 x 30 in for the emitters.
The kit covers specified Char-Broil Commercial and Signature infrared models, including several 4-burner models. It also names Charbroil Performance Infrared 500 3-burner models and selected Nexgrill, BHG, Walmart, Lowe's and Members Mark models.
The included parts make this more complete than a grate-only set, but the larger kit has more compatibility points to verify. Match both the grate and emitter dimensions with the original parts.
Choose BQMAX when your grill matches the listed models and you want one package for both layers. It is especially useful when worn emitter plates are causing you to consider replacing the cooking surface at the same time.
Charbrofire 463365021 Grill Grates Replacement Parts: best for Charbroil Performance 4-burner grills
Charbrofire 463365021 Grill Grates Replacement Parts: Best for Charbroil Performance 4-burner grills
- 3 matte enamel cast iron grates
- 1 larger and 2 narrower grates
- 17 x 10 1/2 in large grate
- 17 x 7 in each narrow grate
The mixed-width layout is designed for specified Char-Broil Performance 4-burner grill parts. It suits owners whose original set uses one larger grate and two narrower grates.
Pros
- Mixed-width layout
- Matte enamel cast iron
- Covers several Performance model numbers
Cons
- Lower score for narrower fit needs
- Model and size checks are essential
Charbrofire uses a 3-piece mixed-width layout for specified Char-Broil Performance 4-burner grills. The set includes 1 larger grate measuring 17 x 10 1/2 in and 2 narrower grates measuring 17 x 7 in each.
The three pieces cover a stated total of 17 x 24 1/2 in. The material is matte enamel cast iron, and the compatible original part numbers include G426-0004-W1 and G426-0005-W1.
The model list includes Performance models such as 463350521, 463351021, 463350722, 463352521, 463354021, 463365021 and 463365522. The mixed layout makes this a better match for grills that originally used one wide section and two narrow sections.
Charbrofire recommends preheating new matte enamel cast iron grates before first use to remove processing residue. It also recommends oiling the grates before or after use and using non-metallic grill tools.
Choose this set when your Performance grill uses the same 3-piece layout and dimensions. It is less suitable for a uniform grate arrangement or a TRU-Infrared grill that needs emitter plates.
How do you measure for Char-Broil replacement grates?
Measure the old grates piece by piece, then compare the total layout with the replacement set. Record each grate's width, depth, thickness if relevant, number of pieces and whether an emitter tray sits below it.
Do not measure only the overall cooking area. A set with the right total width can still fail if one replacement piece is too wide or if the original grill uses one large grate and two narrow grates.
Write down the model number from the grill label or product guide. Charbroil Professional notes that the model year can be identified by the last 2 digits of the model number, but the series and full model number still matter.
If you have a Char-Broil TRU-Infrared grill, identify the emitter parts separately. A grate-only set may fit the top of the grill while leaving a damaged or missing emitter tray unresolved.
For stainless steel options across brands, compare our guide to best stainless steel replacement grill grates. The material guide can help you narrow the choice after the fit is confirmed.
Do TRU-Infrared grills need grates and emitters together?
TRU-Infrared grills may need both grates and emitters together, but the answer depends on the set you choose and the condition of the parts already in the grill. Some replacements cover only the top cooking surface, while others include the emitter layer below it.
Charbroil Professional includes grate and emitter components for compatible systems. BQMAX also includes cooking grates and emitters in one package, which can simplify replacement when both layers are worn.
BBQration and GGC focus on grate replacement rather than a complete two layer system. That approach can work well when the emitter tray below is still flat, seated correctly and suitable for continued use.
Before ordering, inspect the existing emitter plate for warping, damage or heavy wear. A damaged emitter can affect how evenly heat reaches the cooking surface, even if the new grates themselves are in good shape.
If only the cooking surface is worn, a grate only set may be enough for the job. The replacement still needs to sit correctly over the existing emitter without forcing tabs, edges or sections into place.
BBQration specifically requires an additional infrared emitter tray. That requirement should be treated as part of the purchase decision, not as a small detail to check after the grates arrive.
BQMAX includes 3 grates and 3 emitters, with the emitters slightly wider than the cooking grates. Matching both dimensions helps confirm that the two layers will align as intended in the grill.
Charbroil Professional identifies the replacement as a grate and emitter combination. Its section count guidance also helps you plan for 2-burner, 3-burner and 4-burner layouts before you buy.
For grate only sets, measure the cooking pieces and note the emitter tray separately. Keeping those two measurements apart can prevent confusion when comparing packs with different layouts.
Care also depends on the material in each layer. Cast iron grates often need oiling and gentle brushing, while porcelain coated surfaces benefit from tools that avoid scraping the coating.
Set the new parts in place only after the grill is cool and the old pieces have been removed. Check that each section rests evenly before you heat the grill for the first time.
For general Char-Broil care instructions, use the brand's official support resources.
Keep your model number available when checking replacement parts. The model number, original dimensions and emitter condition together give the clearest picture of what you actually need.
How should you install and care for replacement grill grates?
Install replacement grates only after the grill is cool, the cooking surface is clear and the new pieces match the original layout. Remove the old grates, compare the section positions and check that each piece rests evenly before heating the grill.
For cast iron or matte enamel cast iron, oiling can help maintain the cooking surface. Charbrofire recommends applying high-heat cooking oil before or after use and using non-metallic tools.
Direct Parts recommends preheating its porcelain-coated cast iron grates on high for 15 minutes, then brushing them clean. Follow the care directions for the exact material and avoid scraping porcelain coating with tools that can damage it.
Charbroil Professional uses a grate-and-emitter system, so confirm that the emitter sections sit correctly below the cooking grates. Do not force a piece into place if its tabs, edges or dimensions do not match the original arrangement.
For a cleaning routine after installation, see How To Clean A Char Broil Gas Grill?. If you are learning the controls and cooking setup, read How To Use A Char Broil Gas Grill?.
Which Charbroil grill replacement grates should you choose?
Choose Charbroil Professional for a compatible 2015 and newer Commercial, Signature or Professional Series TRU-Infrared gas grill when you need the grate and emitter together. It suits owners replacing a worn two layer system rather than only the top cooking surface.
Choose BBQration for a compatible 2-burner TRU-Infrared layout when the separate emitter tray is already suitable. Its two pack format is aimed at specific listed models, so model number matching matters more than the general series name.
Choose GGC for a compatible 3-burner Commercial or Signature infrared grill with a 3-piece cast iron layout. The heavier cast iron format suits buyers who value heat retention and defined grill marks from the cooking surface.
Choose Direct Parts DC121 when the 16 7/8 x 9 5/16 in grid dimensions match your original set. Its broad model coverage can help when shared dimensions appear across Charbroil and other listed brands.
Choose BQMAX when you need 3 cooking grates and 3 emitters in one kit. That package is useful when worn emitter plates and worn cooking grates are being replaced at the same time.
Choose Charbrofire when your Char-Broil Performance 4-burner grill uses 1 large grate and 2 narrow grates. The mixed width layout is the key reason to pick it over a uniform three piece set.
For daily use, think about the care each material asks for after installation. Cast iron and matte enamel surfaces often benefit from oiling, while porcelain coated grates need gentler tools to protect the finish.
Storage and handling also deserve a quick check before you order. Heavier cast iron sets can be awkward to lift into place, so plan for a cool grill and a steady two handed setup.
The final decision rule is simple: match the full model number, measure every original grate and confirm whether the emitter parts are included. Series names alone are not enough when several models share a similar look.
If the original layout used uniform sections, favor a set with matching uniform pieces. If it used one wide section with narrower pieces, the mixed layout will usually be the closer match.
If you own a Weber grill instead, use our guide to best replacement grill grates for Weber grills rather than assuming Char-Broil dimensions will transfer.
Measure first, confirm the emitter need second and choose the material third. That order keeps the replacement practical for the grill you already own.
Our top 3 picks at a glance
-
1
-
2
Best for compatible 2-burner TRU-Infrared grills
BBQration 17 x 8 3/4 Grill Grates
9.5/10 our score
See it on Amazon -
3
Best for 3-burner cast iron replacements
GGC 17" x23 1/4" Grill Grates Replacement
9.4/10 our score
See it on Amazon
Frequently asked questions
How do I choose Char-Broil grill replacement grates?
Start with the grill model number, series and original grate measurements. Compare the number of pieces, each grate's width and depth, and whether your grill uses an emitter plate.
A similar-looking grate can still fail to fit if the section layout differs.
Do Char-Broil TRU-Infrared grates need emitter plates?
Some TRU-Infrared replacement grates are designed to work with a separate emitter tray or emitter plate. BBQration states that its two-pack requires an additional infrared emitter tray, while Charbroil Professional and BQMAX options include grate-and-emitter components.
Are cast iron or stainless steel grates better for Char-Broil grills?
Cast iron grates retain heat and can create defined grill marks, while stainless steel appears in the Charbroil Professional grate and emitter construction. The better choice depends first on exact fit, then on whether you want a cast iron grate set or a combined grate-and-emitter replacement.
How should I care for replacement grill grates?
Preheat the grates before cooking, brush away residue with a suitable grill brush and oil cast iron or matte enamel surfaces as directed for the material. Avoid metal tools when the grate instructions call for non-metallic tools, and keep the grill model information for future replacement checks.
