How to Use Masterbuilt Gravity Series 800
To use a Masterbuilt Gravity Series 800, load charcoal into the hopper, light the fire starter, set the digital temperature, and let the cooker preheat before adding food. Adjust the temperature in small steps and monitor the meat with a separate thermometer.
On this page (9 sections)
- What should you do before starting the Gravity Series 800?
- How do you load charcoal into a Masterbuilt Gravity Series 800?
- How do you light the Masterbuilt Gravity Series 800?
- How do you set the cooking temperature?
- How do you smoke food in the Gravity Series 800?
- How do you grill on the Masterbuilt Gravity Series 800?
- Which products can help with charcoal cooking?
- How do you shut down and clean the cooker?
- What is the easiest way to use a Masterbuilt Gravity Series 800?
To use a Masterbuilt Gravity Series 800, load charcoal into the hopper, light the fire starter, set the digital temperature, and preheat before cooking.
The gravity-fed design moves charcoal toward the fire as needed.
The controller helps you hold a target cooking temperature during the cook.
That setup suits cooks who want charcoal flavor with less constant manual adjusting.
It also suits anyone who prefers to watch a display rather than guess from vents alone.
Still, the display is a guide for the cooking chamber.
It does not tell you the internal temperature of the meat.
Use a separate food thermometer for that check.
Read the Masterbuilt support and manuals before the first cook.
The manual takes priority for assembly and fuel choices.
It also governs controller use and electrical safety.
Follow it for grease handling and shutdown steps.
Those details differ by model and revision.
Keep them close for your first few cooks.
A clear routine will make later sessions calmer and more repeatable.
What should you do before starting the Gravity Series 800?
Inspect the cooker, clean cooking surfaces, and check the hopper, firebox, ash area, and grease path before adding fuel.
The grill should sit outdoors on a stable surface.
Give it enough clearance from buildings and railings.
Keep overhead materials well above the cooker.
Remove packaging and confirm that grates are seated correctly.
Check trays and heat-management parts in the same pass.
A loose part can change airflow during a cook.
Keep the controller, power cord, and connections dry.
Water and electrics do not mix well outdoors.
Use only the charcoal allowed by the manual.
Use only the fire-starting method the manual allows.
Keep lighter fluid away unless Masterbuilt specifically permits it.
Unwanted fumes can affect food flavor.
They can also create a fire risk around the cooker.
How do you load charcoal into a Masterbuilt Gravity Series 800?
Fill the charcoal hopper with the fuel amount recommended in the manual, then check that the charcoal path is clear. Do not pack fuel into spaces that are not designed to hold it.
Add wood chunks only in the approved location and amount. Wood chunks give smoke flavor, but too much wood can produce harsh smoke and make temperature control harder.
Keep the hopper lid closed during operation. Open the lid only when needed, stand to the side of the cooker, and protect your hands from hot surfaces.
If you prefer a traditional charcoal cooker, compare the best gravity-fed charcoal smokers before choosing your setup. Gravity-fed designs reduce some fire-management work, but they still need safe loading and regular ash removal.
How do you light the Masterbuilt Gravity Series 800?
Place the approved fire starter in the lighting area, start the controller as directed, and set a low or moderate temperature for preheating. Keep the cooking lid and hopper lid closed unless the manual tells you to open one during startup.
Watch the controller display as the fire catches. A gravity-fed cooker may need time for the fire to move through the fuel path and warm the cooking chamber.
Do not add food while the cooker is producing thick, uncontrolled smoke or while the temperature is still climbing sharply. Wait for a stable reading and cleaner smoke.
Avoid standing directly over the hopper or firebox when opening a hot door. Heat and smoke can escape quickly.
How do you set the cooking temperature?
Set the digital temperature close to your target, then make small adjustments after the cooker begins to settle. Large changes can cause overshooting and may take longer to correct.
For smoking, choose a low cooking temperature and allow the chamber to stabilize. For grilling, use a higher setting and preheat the grates fully before adding food.
The built-in display helps you track the cooker temperature, but food temperature is a separate question. Use a suitable meat thermometer and follow safe cooking temperatures for the food you prepare.
Wind, cold weather, rain, frequent lid opening, fuel size, and grease buildup can all affect temperature. Keep the lid closed between checks so the cooker does not lose heat.
How do you smoke food in the Gravity Series 800?
Use indirect heat, a steady low temperature, and light smoke for a controlled smoking session. Place the food away from the hottest area when the cooking layout allows it, then close the lid and monitor the chamber.
Trim excess surface moisture from the food and season it before cooking. Add wood gradually rather than filling the cooker with smoke at once.
Use a water pan only if the manual and your cooking plan allow it. A pan can change airflow and cleanup, so place it where it does not block vents, heat paths, or grease drainage.
The best charcoal smoker setup depends on how much space and fire control you need. Compare the best charcoal smokers if you want a cooker built around longer smoking sessions.
What should you do during a long smoke?
During a long smoke, check fuel, temperature, ash, and food progress without repeatedly opening the cooker. Make changes one at a time so you can tell what affected the temperature.
Keep the hopper closed and inspect fuel only when necessary. If the controller shows a fault or the temperature changes in an unusual way, stop and follow the manual's troubleshooting steps.
Do not pour water, charcoal, or grease into a hot area unless the manual specifically directs you to do so. Keep a safe fire extinguisher nearby and never leave an active cooker unattended.
How do you grill on the Masterbuilt Gravity Series 800?
Preheat the grates at a higher temperature, dry the food surface, and place food on the cooking area only after the heat is steady. Leave enough room to turn food without pushing it into an uncontrolled flare-up.
Use shorter lid-open periods for searing or turning. Each opening lets heat escape and can change the cooking temperature.
For more direct charcoal cooking ideas, see how to use a smoker box on a charcoal grill. The technique differs from a gravity-fed cooker, so do not copy its placement or fuel instructions without checking the Masterbuilt manual.
Which products can help with charcoal cooking?
A separate cooker can help if you want a simpler charcoal setup or a different layout. These products are not Masterbuilt Gravity Series 800 parts, so check their instructions and use each only for its intended design.

The Royal Gourmet CC1830S gives you an 824 sq. in. charcoal grill and offset smoker with an adjustable charcoal pan, lid thermometer, side door, front table, and side table.
See it on AmazonIts 475.3 sq. in. porcelain-enameled steel wire cooking grates, 151 sq. in. chrome-plated warming rack, and 197.3 sq. in. offset smoker suit readers who want separate grilling and smoking areas. The alloy steel cart weighs 45.2 lb and requires user assembly.

The Royal Gourmet CC1830SC adds an 824 sq. in. charcoal grill and offset smoker with a 2-level adjustable pan, lid thermometer, side tables, and an included grill cover.
See it on AmazonThe cooking area includes 475.3 sq. in. of porcelain-enameled steel wire grates, a 151 sq. in. warming rack, and a 197.3 sq. in. offset smoker. Its charcoal pan holds up to 4.4 lb of coal, and the bottom shelf holds up to 20 lb when evenly distributed.

The Oklahoma Joe's Canyon Combo gives you a 750 sq. in. primary area, a 281 sq. in. firebox grate, charcoal smoking, and a 36,000 BTU 3-burner propane side.
See it on AmazonChoose it if you want both charcoal and propane cooking in one unit. The painted-steel combo has porcelain-coated cast-iron grates, adjustable firebox and smokestack dampers, dual lid temperature gauges, and a removable firebox ash pan.
How do you shut down and clean the cooker?
Finish with the controller's shutdown process, close the airflow controls as directed, and wait until all charcoal and ash are completely cool. Never empty hot ash into a plastic bin, trash can, or near dry grass.
After the cooker is cold, remove ash from the correct area and clear grease from trays or channels. Clean cooking grates according to the manual, then dry parts that could rust.
Inspect the hopper, firebox, seals, vents, controller, and power cord before the next cook. Replace damaged parts before using the grill again.
Keep the cooker covered only when it is clean and fully dry. Moisture trapped against ash or grease can make cleanup harder and may contribute to corrosion.
What is the easiest way to use a Masterbuilt Gravity Series 800?
The easiest routine is prepare the cooker, load the approved fuel, light it safely, preheat until stable, cook with the lid closed, and shut down completely. Use the digital setting as a guide, but confirm food temperature separately.
Pick the Gravity Series 800 if you want gravity-fed charcoal cooking with controller-assisted temperature management. Pick a traditional charcoal smoker if you prefer direct control through vents, or choose a dual-fuel cooker if propane speed matters as much as charcoal flavor.
For another charcoal layout with smoking space, compare the best charcoal grill with offset smoker. If you also use pellet equipment, review How To Start Pit Boss Pellet Grill Pro Series? before switching fuel systems.
Frequently asked questions
How do you start a Masterbuilt Gravity Series 800?
Open the hopper and firebox, add the charcoal called for in the manual, and place an approved fire starter in the ash tray or lighting area. Start the grill, set the digital temperature, and let the cooker preheat with the lid closed before adding food.
How long does a Masterbuilt Gravity Series 800 take to heat?
Allow time for the charcoal fire to catch and the cooking chamber to reach the set temperature. The exact time changes with weather, fuel, the starting temperature, and the target setting, so rely on the cooker display and a separate food thermometer rather than a fixed minute count.
Can you grill and smoke on a Masterbuilt Gravity Series 800?
Yes. Use a lower temperature for smoking with indirect heat and a higher temperature for grilling.
Keep the lid closed as much as possible, make small temperature changes, and follow the manual for charcoal, wood chunk, ash, and grease-management limits.
How do you shut down a Masterbuilt Gravity Series 800?
Stop the cook through the controller's shutdown process, close the vents or dampers as directed, and let the charcoal cool completely. Do not remove hot ash or move the cooker until the fire is out and all surfaces are safe to touch.
About this guide: Our look at using a Masterbuilt Gravity Series 800 draws on maker specs, materials and what owners report. See how we research.



