Guide

How to Gas Grill a 1.5-Inch Swordfish Steak

Updated on · By the Easy Recipe Maker team

Gas grill a 1.5 inch swordfish steak over medium-high heat for about 5 to 7 minutes per side, then check the center with a thermometer. Remove it when the thickest part reaches 145°F, and rest it briefly before serving.

On this page (9 sections)
  1. How do you gas grill a 1.5 inch swordfish steak?
  2. What grill temperature works for a thick swordfish steak?
  3. How should you season and prepare swordfish before grilling?
  4. When should you flip a 1.5 inch swordfish steak?
  5. How do you check swordfish for doneness?
  6. Which grill setup helps with thick swordfish?
  7. How do you prevent a 1.5 inch swordfish steak from drying out?
  8. What should you serve with grilled swordfish?
  9. What is the final timing rule for gas grilling swordfish?

Gas grill a 1.5 inch swordfish steak over medium-high direct heat for about 5 to 7 minutes per side. Use a thermometer instead of time alone, and remove the steak when the center reaches 145°F.

A 1.5 inch steak needs more time than a thin swordfish cut. The outside can brown quickly while the center is still undercooked, so steady heat and a center temperature check matter more than a dark surface.

How do you gas grill a 1.5 inch swordfish steak?

Preheat the gas grill to medium-high heat, oil the grate, and cook the steak for 5 to 7 minutes per side. Keep the lid closed between turns so the grill holds a steady cooking temperature.

Pat the swordfish dry with paper towels. Brush it lightly with cooking oil, then season both sides with salt, pepper, lemon zest, garlic, or another seasoning that suits seafood.

Place the steak over direct heat. Close the lid and cook until the first side has clear grill marks and releases easily from the grate.

Flip the swordfish once. Start checking the center after about 4 minutes on the second side, because some grills run hotter than others.

The steak is ready when the thickest part reaches 145°F. Insert the thermometer from the side into the center of the steak, then rest the swordfish for about 3 minutes before serving.

What grill temperature works for a thick swordfish steak?

Medium-high heat works best for a 1.5 inch swordfish steak because it browns the outside while giving the center time to cook. A very high flame can darken the surface before the center reaches a safe temperature.

Clean the grate before preheating. Once hot, brush away residue with a grill brush approved for your grate, then apply a thin layer of oil with a folded paper towel and long tongs.

Keep one cooler area available if your grill has enough space. If the outside browns too quickly, move the steak away from the strongest flame and finish it with the lid closed.

A gas grill with a built-in thermometer can help you watch the overall heat, but it doesn't measure the swordfish's center. The thermometer you insert into the steak gives the more useful reading.

How should you season and prepare swordfish before grilling?

Use a light oil coating and simple seasoning before grilling. Swordfish has a firm texture, so it can handle bold flavors, but a heavy wet marinade can make the surface harder to brown.

Dry the steak first, especially if it has been stored in a marinade. Excess moisture can delay browning and cause the fish to steam on the grate.

If you want a longer marinade, keep the fish chilled and follow a food-safe handling routine. For another seafood grilling idea, compare this guide with trout fillet marinade for pellet grill.

Don't rely on color alone. Swordfish can look browned on the outside before the thick middle is ready.

When should you flip a 1.5 inch swordfish steak?

Flip the steak once when the first side has browned and the fish releases from the grate. On a medium-high gas grill, this often happens after about 5 to 7 minutes.

If the steak sticks, give it another minute rather than forcing it loose. Scraping too early can tear the surface and leave part of the fish on the grate.

Use a thin spatula or sturdy tongs that support the whole steak. Avoid squeezing the fish, since pressure can push moisture out of the center.

After flipping, close the lid and begin checking the internal temperature before the full second-side time has passed. A thinner edge may finish before the middle.

How do you check swordfish for doneness?

Check the thickest center with an instant-read thermometer and stop at 145°F. Insert the probe horizontally from the side so its tip reaches the center of the steak.

The fish should look opaque through the middle and separate into firm flakes when cut. The thermometer remains the better guide because color and texture can vary with the steak's shape.

Remove the steak promptly at the target temperature. Carryover heat can continue cooking it during the short rest.

For related seafood temperature guidance, see smoked trout on pellet smoker internal temp. The cooking method differs, but the same habit applies: check the thickest part rather than judging only by time.

Which grill setup helps with thick swordfish?

A full-size grill gives you more room to create a hot zone and a cooler zone. A portable grill can work for one steak, but you need enough grate space to place the fish away from the strongest flame if it browns too fast.

The Masterbuilt 30-Inch Dual Fuel Propane & Charcoal is a vertical smoker with propane and charcoal fuel options, 4 smoking racks, a push-button ignition, a temperature gauge, a porcelain-coated wood chip tray, and a water pan. For other options, compare budget propane gas smokers.

It suits readers who want smoking equipment for seafood as well as a propane cooking setup.

Because this is a vertical smoker, it isn't the same tool as a standard open gas grill. Choose it when smoking is part of your plan, and use a dedicated grill when direct-heat searing is the main job.

The Camco Kuuma Stow N Go 125 Stainless is a compact gas grill with a 125 square inch cooking surface, a single burner, 9,000 BTU of heating power, 304 stainless steel construction, and a 14.5 lb weight. It suits one or two steaks when you need a small outdoor grill.

Its smaller cooking surface gives you less room for a separate cooler zone. Watch the steak closely, keep the lid closed between checks, and measure the center temperature before serving.

The Cuisinart Charcoal Grill is a 14 in portable tabletop grill with a 196 square inch cooking surface, a chrome-plated grate, dual vents, an enamel-coated firebox, an ash base, and a locking lid. It suits readers who want portable charcoal cooking rather than gas grilling.

This grill does not use gas, so it isn't the direct match for the question. Its dual vents can help manage charcoal heat, but the fire needs to be ready before the swordfish goes on the grate.

How do you prevent a 1.5 inch swordfish steak from drying out?

Use steady heat, start checking early, and stop cooking at 145°F. Swordfish is firm and meaty, but extra minutes over direct heat can make the center dry.

Avoid pressing the steak with a spatula. Keep the lid closed as much as possible, and turn the fish only once unless you need to move it away from a flare-up.

A short rest is enough. Slice across the steak after resting, and add lemon juice, herb oil, or a sauce at the table instead of cooking the fish far past its target temperature.

If the steak is unusually thick or cold from the refrigerator, expect the cooking time to move toward the longer end. If it is thin near the edges, check the center sooner.

What should you serve with grilled swordfish?

Serve grilled swordfish with bright, fresh sides that balance its firm texture. Lemon, chopped herbs, cucumber salad, grilled vegetables, rice, and a light bean salad all work without covering the fish's flavor.

Add sauce after checking the temperature. A lemon and olive oil mixture, salsa, or herb butter can add moisture without changing the grill timing.

Keep raw seafood tools and cooked-food tools separate. Place the finished steak on a clean plate, not the plate that held the uncooked fish.

What is the final timing rule for gas grilling swordfish?

For anyone asking how to gas grill a 1.5 inch swordfish steak, start with 5 to 7 minutes per side over medium-high direct heat, then trust the thermometer. Remove the steak at 145°F, rest it briefly, and serve it while the center is still moist.

Choose the Camco for a compact gas setup, the Masterbuilt for a propane-capable smoker that also supports smoking projects, and the Cuisinart when portable charcoal cooking fits better. For a standard gas-grill method using thinner or different cuts, read How To Grill Swordfish Steaks On Gas Grill? and How To Grill Swordfish On A Gas Grill?.

Frequently asked questions

How long does it take to gas grill a 1.5 inch swordfish steak?

A 1.5 inch swordfish steak usually needs about 5 to 7 minutes per side over medium-high direct heat. Timing changes with starting temperature, grill heat, steak shape, and wind, so use the time as a guide and confirm that the thickest center reaches 145°F.

What temperature should a 1.5 inch swordfish steak reach?

Cook swordfish to 145°F in the thickest part, measured with an instant-read thermometer. Insert the probe from the side into the center so the tip does not rest near the grill grate or stop in a thinner edge.

Should you flip a 1.5 inch swordfish steak on a gas grill?

Yes, flip the swordfish once halfway through cooking. One turn helps the steak cook more evenly and gives both sides direct contact with the hot grate without repeatedly releasing moisture.

How do you keep thick swordfish from drying out?

Pat the steak dry, coat it lightly with oil, use a fully heated grate, and avoid cooking far past 145°F. A short rest after grilling lets the heat settle while the firm swordfish stays moist enough to slice cleanly.